Encoders and decoders
TX1 and TX4. Coming soon.
Encoders and decoders that belong to Flow. Plug in power and network, scan the code on the box, confirm on its front panel, and its inputs and outputs appear in your patch panel.
TX4 / Online. Claimed and connected. The window lights steady in Flow's tally and the screen shows what each port is doing.
TX4 / Unclaimed. Fresh out of the box. The window breathes white until someone scans the code and claims it.
TX4 / Claim pending. Someone has named it in Flow. The window pulses amber and waits for a press of the button on the box.
TX4 / Fault. Something needs a hand, such as a missing network cable. The window flashes red and the screen says what.
Claiming a unit
From the box to the patch panel in four steps.
Step 1: Scan the code.
Step 2: Sign in to Flow.
Step 3: Name the unit and choose which ports are inputs.
Step 4: Confirm on the box.
Drawn to scale
Front and rear.
TX1 is half-rack, TX4 a full 1U. Every drawing below shares one scale, so the units sit at their true sizes against each other. USB-C* on the rear is reserved for future audio.
Drawings of production units. Details may change before release.
Models
Three models to start.
- TX1-HDMIThe entry model
- ConnectorsOne HDMI in, one HDMI outForm factorHalf-rackCoolingFanless, one fan position for hot installsRear USB-CReserved for future audio
- TX1-SDI
- ConnectorsOne 3G-SDI in, one outForm factorHalf-rackCoolingFanless, one fan position for hot installsRear USB-CReserved for future audio
- TX4-SDI
- ConnectorsFour SDI ports, each set as in or outForm factor1UCoolingFront to back, two 40 mm PWM fans beside the SDI cardRear USB-CReserved for future audio
With Flow
Rent or buy the unit.
An input port uses one source slot on your Flow plan; output ports are included like any other destination.